Dell PowerVault MD3220 - Recopying a Virtual Disk

162 Script Commands
Download Storage Array Physical Disk Frimware
This command downloads firmware images to all of the physical disks in the
storage array.
Syntax
download storageArray physicalDiskFirmware file=
”filename”
[file=”filename2”... file=”filenameN”]
Parameter
NVSRAM-filename File path and name of the file that
contains the NVSRAM values. Valid file
names must end with a .dlp extension. You
must put quotation marks (" ") around the
NVSRAM file name. You must include a
comma after the firmware file name.
downgrade Specifies that you are loading firmware
that is a previous version. The default
value is FALSE. Set downgrade to TRUE
if you want to download an earlier version
of firmware.
activateNow Activates the firmware and NVSRAM
images. The default value is TRUE. If you
set activateNow to FALSE, you must use
the activate storageArray firmware
command to activate the firmware and
NVSRAM values at a later time.
Parameter Description
file File path and name of the file that contains the
firmware. Valid file names must end with a .dlp
extension. You must put quotation marks (" ")
around the file name.
Parameter Description
book.book Page 162 Friday, March 4, 2011 10:45 AM