Dell PowerVault MD3220 - Remove Virtual Disk Copy; Remove Virtual Disk LUN Mapping

Script Commands 173
NOTE: If no optional parameters are specified, the recreate snapshot command
processes the specified snapshot virtual disks as a batch, provided a validation
check of all of the virtual disks runs successfully. If successful, the snapshots start
the re-creation process and all of the affected virtual disks (snapshot, source, and
repository) are quiesced until the process is complete.
NOTE: The Microsoft Virtual Shadow Copy Service (VSS) provider allows the
recreation of multiple snapshots simultaneously.
Remove Virtual Disk Copy
This command removes a virtual disk copy pair.
Syntax
remove virtualDiskCopy target [targetName]
[source [sourceName]]
Parameters
Remove Virtual Disk LUN Mapping
This command removes the logical unit number (LUN) mapping.
Syntax
remove (allVirtualDisks | virtualDisk
["virtualDiskName"] |
virtualDisks ["virtualDiskName1" ...
"virtualDiskNamen"] | accessVirtualDisk)
lunMapping (host="hostName" | hostGroup=
"hostGroupName")
Parameter Description
target Name of the target virtual disk to remove. You must put
brackets ([ ]) around the target virtual disk name. If the target
virtual disk name has special characters, you must also put
quotation marks (" ") around the target virtual disk name.
source Name of the source virtual disk to remove. You must put
brackets ([ ]) around the source virtual disk name. If the
source virtual disk name has special characters, you must also
put quotation marks (" ") around the source virtual disk name.
book.book Page 173 Friday, March 4, 2011 10:45 AM