Dell PowerVault MD3220 - Management: Firmware Inventory; Viewing the Firmware Inventory

Script Commands 213
Set Storage Array iSNS Server IPv4 Address
This command sets the configuration method and address for an IPv4
Internet Storage Name Service (iSNS).
Syntax
set storageArray isnsIPv4ConfigurationMethod=
[static | dhcp]
isnsIPv4Address=ipAddress
Parameter
Set Storage Array iSNS Server IPv6 Address
This command sets the IPv6 address for the iSNS server.
Syntax
set storageArray isnsIPv6Address=ipAddress
Parameter
Parameter Description
isnsIPv4Address The IP address that you want to use for the iSNS server.
Use this parameter with the static value for IPv4
configurations. If you choose to have a DHCP server set
the IP address for an IPv4 Internet iSNS server, you must
set the isnsIPv4Address parameter to 0.0.0.0.
Parameter Description
isnsIPv6Address The IPv6 address that you want to use for the iSNS
server.
book.book Page 213 Friday, March 4, 2011 10:45 AM