Dell PowerVault MD3220 - Clear Physical Disk Port Statistics; Clear Storage Array Configuration

120 Script Commands
Clear Physical Disk Port Statistics
This command resets the statistics for all physical disk ports.
Syntax
clear allPhysicalDiskChannels stats
Parameters
None.
Clear Storage Array Configuration
Use this command to:
• Clear the entire storage array configuration, and return it back to the
initial installation state.
• Clear the configuration except for security information and identification
information.
• Clear disk group configuration information and virtual disk configuration
information only.
CAUTION: As soon as you run this command, the existing storage array is deleted.
Syntax
clear storageArray configuration (all |
volumeGroups)
Parameters
If you do not enter a parameter, this command removes all configuration
information for the storage array, except for the information related to
security and identification.
Parameter Description
all The setting to remove the entire configuration of
the storage array, including security and identity
information. Removing all configuration
information returns the storage array to its initial
state.
book.book Page 120 Friday, March 4, 2011 10:45 AM