Script Commands 189
Set Enclosure Attribute
This command sets user-defined attributes for an enclosure.
Syntax
set enclosure [enclosureID] (chassisName |
assetTag)= "userID"
Parameters
Set Enclosure Identification
This command sets the ID of an enclosure in a storage array.
Syntax
set enclosure ["Service Tag"] id=enclosureID
Parameter Description
enclosureID Identifies a specific enclosure for which to set the attribute.
Enclosure ID values are 0 to 99. You must put brackets ([ ])
around the enclosure ID value.
chassisName Chassis name or number to give the new enclosure. Chassis names
can be any combination of alphanumeric characters with a
maximum length of 32 characters. Alphabetical characters can be
uppercase or lowercase. You can also use the underscore character
(_) and the hyphen (-) character. You cannot use spaces in a chassis
name. You must put quotation marks (" ") around the chassis name.
assetTag Asset tag name or number to give the new enclosure. Asset tags can
be any combination of alphanumeric characters with a maximum
length of ten characters. Alphabetical characters can be uppercase or
lowercase. You can also use the underscore character (_) and the
hyphen (-) character. You cannot use spaces in an asset tag name.
You must put quotation marks (" ") around the asset tag name.
book.book Page 189 Friday, March 4, 2011 10:45 AM
To Next Page
Loading...
