Dell PowerVault MD3220 - Set Storage Array Isns Server Listening Port; Set Storage Array Learn Cycle

214 Script Commands
Set Storage Array iSNS Server Listening Port
This command sets the iSNS server listening port.
Syntax
set storageArray isnsListeningPort=
listeningPortIPAddress
Parameter
Additional Information
A listening port resides on the database server and is responsible for
these activities:
• Listening (monitoring) for incoming client connection requests
• Managing the traffic to the server
When a client requests a network session with a server, a listener receives the
actual request. If the client information matches the listener information,
then the listener grants a connection to the database server.
Set Storage Array Learn Cycle
This command sets the learn cycle for the battery backup unit. The learn
cycle enables the MD storage management software to predict the remaining
battery life. Learn cycles run at set intervals and store the results for
software analysis.
Syntax
set storageArray learnCycleDate
(daysToNextLearnCycle=numberOfDays |
day=dayOfTheWeek) time=HH:MM
Parameter Description
isnsListeningPort The IP address that you want to use for the iSNS server
listening port. The range of values for the listening port
is 49152 to 65535. The default value is 3205.
book.book Page 214 Friday, March 4, 2011 10:45 AM