Dell PowerVault MD3220 - Stop Storage Array Physical Disk Firmware Download; Stop Virtual Disk Copy

260 Script Commands
Parameter
Stop Storage Array Physical Disk Firmware Download
This command stops a firmware download to the physical disks in a storage
array that was started with the download storageArray physicalDiskFirmware
command. This command does not stop a firmware download that is already
in progress to a physical disk; however, this command stops all firmware
downloads to physical disks that are waiting for the download.
Syntax
stop storageArray physicalDiskFirmwareDownload
Parameters
None.
Stop Virtual Disk Copy
This command stops a virtual disk copy operation.
Syntax
stop virtualDiskCopy target [targetName] [source
[sourceName]]
Parameter Description
sessioNumber The identifier number of the iSCSI session. Enclose the identifier
number of the iSCSI session in square brackets ([ ]).
book.book Page 260 Friday, March 4, 2011 10:45 AM