Dell PowerVault MD3220 - Show String; Show Virtual Disk

240 Script Commands
Show String
This command shows a string of text from a script file. This command is
similar to the echo command in MS-DOS and UNIX.
Syntax
show “textString”
Parameters
None.
NOTE: You must enclose the string in double quotation marks (“ ”).
Show Virtual Disk
For the virtual disks in a storage array, this command returns the following
information:
• The number of virtual disks
• The name
•The status
•The capacity
•The RAID level
• The disk group where the virtual disk is located
•Details:
– The virtual disk ID
– The subsystem ID
– The physical disk type (SAS)
– Enclosure loss protection
–The preferred owner
– The current owner
– The segment size
– The modification priority
– The read cache status (enabled or disabled)
– The write cache status (enabled or disabled)
book.book Page 240 Friday, March 4, 2011 10:45 AM