Dell PowerVault MD3220 - Page 234

234 Script Commands
Parameters
Parameter Description
profile Displays all properties of the logical and physical
components that comprise the storage array.
The information returned takes several screens
to display.
NOTE: The profile parameter returns detailed
information about the storage array. The
information covers several screens on a display.
You might need to increase the size of your display
buffer to see all the information. Because this
information is so detailed, you might want to save
the output of this parameter to a file. To save the
output to a file, enter the show storageArray
command similar to the following:
smcli 123.45.67.89 -c "show
storagearray profile;" -o
"c:\\folder\\storagearray
profile.txt"
NOTE: The previous command syntax is for a host
running Windows. The actual syntax varies
depending on your operating system.
autoSupportConfiguration The parameter to return information about the
current state of the operation to automatically
collect support data. The information this
parameter returns is:
• Whether the operation is enabled or disabled
• The location of the folder where the support
data file is located
batteryAge Displays the status, the age of the battery in days,
and the number of days until the battery needs
to be replaced.
connections Displays a list of the drive channel port locations
and the drive channel connections.
defaultHostType Displays the default host type and host type
index.
book.book Page 234 Friday, March 4, 2011 10:45 AM