Delta Electronics ASDA-B2 series - Page 257

Chapter 7 Servo Parameters ASDA-B2
7-92 Revision September 2013
Settings:
In speed mode, the users can use this parameter to add an offset value to analog
speed input.
P4-23
TAO Analog Torque Input Offset
Address: 042EH
042FH
Operation
Interface:
Keypad / Software Communication
Related Section: N/A
Default: 0
Control
Mode:
T
Unit: mV
Range: -5000 ~ 5000
Data Size: 16-bit
Display
Format:
Decimal
Settings:
In speed mode, the users can use this parameter to add an offset value to analog
speed input.
P4-24
LVL Undervoltage Error Level
Address: 0430H
0431H
Operation
Interface:
Keypad / Software Communication
Related Section: N/A
Default: 160
Control
Mode:
ALL
Unit: V (rms)
Range: 140 ~ 190
Data Size: 16-bit
Display
Format:
Decimal
Settings:
When DC Bus voltage is lower than the value of P4-24 x
2 , the fault, Undervoltage
will occur.
VARITEL INGENIERIA ELECTRONICA S.A.
info@varitel.com - www.varitel.com - Tel. (54) 11-4243-1171 / Fax: (54) 11-4292-7545
Manuel Baliña 456, Lomas de Zamora (B1832CCJ) Buenos Aires, Argentina.