Figure 2-1 : Unpack the inverter
The unpacking procedure of RPI M50A is shown as Figure 2-1.
Unforeseeable events causing damage or movement may occur during shipment.
Please check following items upon receiving your inverter.
• Check the damage on the packaging.
• Check if all the accessories are in the package.
The standard accessories are shown in following tables and figures:
Please refer to Figure 2-2 and Table 2-1.
• Check the model number and the serial number on the packaging is identical
with the model number and serial number on the unit itself.
If there is any visible damage to the inverter/accessories or any damage to the
packaging, please contact your inverter supplier.
2 Product Overview
2.1 Unpack the Inverter
2.2 Checking Unit and Accessories
10
Product Overview
To Next Page
Loading...
