Delta RPI Series User Manual

Figure 6-6 : Replace the fuse
Figure 6-7 : Disassembling fan panel
Loosen the 4 screws shown in Figure 6-7. Once the screws are loose, pulling
the fan bracket out will expose the connectors. Each fan has one wire connected.
6.3 Clean Fan
* Screw torque required for assembling: 10 Kgf-cm (1N-m)
55
Maintenance

Delta RPI Series Specifications

General

Efficiency	Up to 98.8% (depending on model)
Frequency	50 Hz / 60 Hz
Model	RPI Series
Type	Inverter
Protection Rating	IP65
Cooling	Natural convection
Category	Inverter
Cooling Method	Natural convection
Dimensions	Varies by model
Weight	Varies by model
Protection Features	Overvoltage, Short Circuit