Delta RPI Series - Turn On PV Inverter

RPI M50A include a 4x20 character type LCD display and 2 LED lights to indicate
inverter’s status. For physical characteristics.
Please refer to Table 5-1 for more information about inverter’s statuses and
LED indicator.
The following section will introduce the functions that can be adjusted by users
through the LCD panel. When you are adjusting settings, LCD panel will change
the display cursor from “►” to “ ”.
Power Meter
Energy Log
Event Log
Inverter Information
General Settings
Install Settings
Active/Reactive Power
FRT
5.2.2
5.2.3
5.2.4
5.2.5
5.2.6
5.2.7
5.2.8
5.2.9
Figure 5-1 : Panel indicator
5 Turn On PV Inverter
5.1 LCD Flow Chart
WARNING：BURN HAZARD!
- The enclosure temperature may exceed 70°C while inverter is operation.
A dangerous burn hazard is present in this situation.
LED Indicator (RED)
LED Indicator (GRN)
EXIT : Exit Menu
Down : Move Down
UP : Move UP
ENT : Enter Menu or Confirm
34
Turn On PV Inverter