Delta RPI Series User Manual

进入Install Settings页面前需要输入密码，密码分为三种权限：用户权力、安装
者权限以及制造商权限。以下章节仅会介绍用户权力与安装者权限所需之各项设
定值。
Inverter ID: 002
Insulation
Country
Grid Settings
►
DC Injection
Dry Contact
RCMU
EPO
►
ON
Normal Close
AC Connection
Anti-islanding
Max Power
Return to Factory
►
3P4W
ON
55000W
User Level:
- Inverter ID
- Insulation
- Country
- Dry Contact
- EPO
- AC Connection
- Max. Power
Manufacturer Level:
- All Settings
Installer Level:
- Inverter ID
- Insulation
- Country
- Grid Settings
- Dry Contact
- EPO
- AC Connection
- Max. Power
图5-9 : Install settings页面
图5-10 : Inverter ID页面
逆变器的ID使用于RS-485通讯时，使Master(主)端能顺利辨认各个Slave(仆)端之
逆变器。当使用者将多台逆变器透过RS-485串联时，各逆变器必须要有不同的ID。
Setting ID:
ID = 0
02
Inverter ID: 002
Insulation
Country
Grid Settings
►
EXIT
ENT
5.2.7 Install Settings
5.2.7.1 Inverter ID
- 此页面仅允许专业安装人员或有专业人员在旁指导时方可调整，任意更改
这些设定有可能造成逆变器损坏。
注 意！
113
逆变器开机

Delta RPI Series Specifications

General

Efficiency	Up to 98.8% (depending on model)
Frequency	50 Hz / 60 Hz
Model	RPI Series
Type	Inverter
Protection Rating	IP65
Cooling	Natural convection
Category	Inverter
Cooling Method	Natural convection
Dimensions	Varies by model
Weight	Varies by model
Protection Features	Overvoltage, Short Circuit