Delta RPI Series - Inverter Information

This page can helps user to recognize the inverter. First section displays serial
number, installation date, ID, and firmware version. Another 3 sections displays
the settings of inverter functions. For more information about these settings,
please refer to 5.2.7 Install Settings, 5.2.8 Active/Reactive power, and 5.2.9
FRT (Fault ride through).
Figure 5-7 : Inverter information page
5.2.5 Inverter Information
S/N: RN11179CB0
Install: 30/04/2014
DSP 1.80 Red. 1.65
Comm. 1.65 ID: 002
Country:
Insulation:
Baud Rate:
Germany MV
250kΩ
19200bps
►
FRT Settings
EPO:
Grid Settings
Active Pwr Settings
React Pwr Settings
Normal Close
►
AC connection:
Max. Power:
Dry Cont A:
Dry Cont B:
3P4W
55000W
Insu.
Insu.
or
ENT
or
ENT
or
ENT
or
ENT
38
Turn On PV Inverter