User Manual DEV 2190
Copyright DEV Systemtechnik GmbH 2009-2017 83
5.5.4.3.9.25 .application.portTable.portEntry.poInputPower
OID: .1.3.6.1.4.1.21035.41.2.9.1.25.x
Syntax: INTEGER32
Access: read-only
Description: The measured input power in [dBm/10].
.poInputPower is not implemented for this type of device.
5.5.4.3.9.26 .application.portTable.portEntry.poInputPowerLimit
OID: .1.3.6.1.4.1.21035.41.2.9.1.26.x
Syntax: INTEGER32
Access: read-write
Description: The lower limit of the input power in [dBm/10].
.poInputPowerLimit is not implemented for this type of device.
5.5.4.3.9.27 .application.portTable.portEntry.poHasOutputPower
OID: .1.3.6.1.4.1.21035.41.2.9.1.27.x
Syntax: INTEGER {yes (1), no (2)}
Access: read-only
Description: The indication whether output power measurement capability is
provided or not.
.poHasOutputPower is not implemented for this type of device.
5.5.4.3.9.28 .application.portTable.portEntry.poOutputPower
OID: .1.3.6.1.4.1.21035.41.2.9.1.28.x
Syntax: INTEGER32
Access: read-only
Description: The measured output power in [dBm/10].
.poOutputPower is not implemented for this type of device.
5.5.4.3.9.29 .application.portTable.portEntry.poDWDMChannelNumber
OID: .1.3.6.1.4.1.21035.41.2.9.1.29.x
Syntax: INTEGER32
Access: read-only
Description: The channel number for DWDM Tx modules.
.poDWDMChannelNumber is not implemented for this type of
device.
5.5.4.3.10 .application.antennaStatus
OID: .1.3.6.1.4.1.21035.41.2.10.0
Syntax: INTEGER {moving (1), rfok (2), rfnok (3), (0)}
Access: read-only
Description: The status of the motorized antenna.
.antennaStatus is not implemented for this type of device.
To Next Page
Loading...