User Manual DEV 2190
84 Copyright DEV Systemtechnik GmbH 2009-2017
5.5.4.3.11 .application.antennaPosition
OID: .1.3.6.1.4.1.21035.41.2.11.0
Syntax: INTEGER32
Access: read-only
Description: The position of the motorized antenna.
.antennaPosition is not implemented for this type of device.
5.5.4.3.12 .application.numberOfMatrixOutputs
OID: .1.3.6.1.4.1.21035.41.2.12.0
Syntax: INTEGER (0..128)
Access: read-only
Description: The number of matrix output ports.
Not applicable for this type of device, thus "0" is returned.
5.5.4.3.13 .application.numberOfMatrixInputs
OID: .1.3.6.1.4.1.21035.41.2.13.0
Syntax: INTEGER (0..128)
Access: read-only
Description: The number of matrix input ports.
Not applicable for this type of device, thus "0" is returned.
5.5.4.3.14 .application.selectCrosspointSwitchingMode
OID: .1.3.6.1.4.1.21035.41.2.14.0
Syntax: INTEGER {tablemode (1), stringmode (2)}
Access: read-write
Description: The switching mode of the matrix.
.selectCrosspointSwitchingMode is not supported by this type of
device; i.e. it has no effect on the functionality of the device.
5.5.4.3.15 .application.activeCrosspointSetting
OID: .1.3.6.1.4.1.21035.41.2.15.0
Syntax: INTEGER (1..16)
Access: read-write
Description: The selection of a string from the .crosspointStringTable (please
refer to chapter 5.5.4.3.16) to apply the corresponding switching
scenario.
.activeCrosspointSetting is not supported by this type of device; i.e.
it has no effect on the functionality of the device.
To Next Page
Loading...