User Manual DEV 2190
Copyright DEV Systemtechnik GmbH 2009-2017 85
5.5.4.3.16 .application.crosspointStringTable
The .crosspointStringTable is not implemented for this type of device.
5.5.4.3.16.1 .application.crosspointStringTable.crosspointStringEntry.crosspointStringIndex
OID: .1.3.6.1.4.1.21035.41.2.16.1.1.x
Syntax: INTEGER (1..16)
Access: read-only
Description: A unique value for each table entry ranging between "1" and the
number of entries (i.e. "16").
Not applicable for this type of device, since the
.crosspointStringTable is not implemented.
5.5.4.3.16.2 .application.crosspointStringTable.crosspointStringEntry.crosspointString
OID: .1.3.6.1.4.1.21035.41.2.16.1.2.x
Syntax: OCTET STRING
Access: read-write
Description: A comma separated string that is interpreted as integers describing
a switching scenario of the matrix.
Not applicable for this type of device, since the
.crosspointStringTable is not implemented.
5.5.4.3.17 .application.crosspointTable
The .crosspointTable is not available for this type of device due to the fact that for
.numberOfMatrixOutputs (please refer to chapter 5.5.4.3.12) "0" is returned.
5.5.4.3.17.1 .application.crosspointTable.crosspointEntry.outChNr
OID: .1.3.6.1.4.1.21035.41.2.17.1.1.x
Syntax: INTEGER (1..128)
Access: read-only
Description: A unique value for each table entry ranging between "1" and the
number of entries (defined by .numberOfMatrixOutputs, please
refer to chapter 5.5.4.3.12).
Not applicable for this type of device, since the .crosspointTable is
not available.
5.5.4.3.17.2 .application.crosspointTable.crosspointEntry.inChNr
OID: .1.3.6.1.4.1.21035.41.2.17.1.2.x
Syntax: INTEGER (1..128)
Access: read-write
Description: The number of the input port to which the corresponding output
port is (to be) connected to.
Not applicable for this type of device, since the .crosspointTable is
not available.
To Next Page
Loading...