DEV 2190 - .surveillance.internalDeviceStatus; .surveillance.supportHardwareStatus

User Manual DEV 2190
 Copyright DEV Systemtechnik GmbH 2009-2017 91
5.5.4.4.10.2 .surveillance.fanTable.fanEntry.fanStatus
OID: .1.3.6.1.4.1.21035.41.3.10.1.2.x
Syntax: INTEGER {ok (1), notok (2)}
Access: read-only
Description: The status of the related fan, possible values:
"1" ok: no errors are reported for the fan;
"2" not ok: an error was detected for the fan.
5.5.4.4.11 .surveillance.internalDeviceStatus
OID: .1.3.6.1.4.1.21035.41.3.11.0
Syntax: INTEGER {ok (1), notok (2)}
Access: read-only
Description: The internal device status (e.g. temperature, communication),
possible values:
"1" ok: no internal device errors are reported;
"2" not ok: an internal device error was detected.
5.5.4.4.12 .surveillance.externalDeviceStatus
OID: .1.3.6.1.4.1.21035.41.3.12.0
Syntax: INTEGER {ok (1), notok (2), notapplicable (3)}
Access: read-only
Description: The status of external devices, e.g. of an antenna controller.
There are no external devices available for the DEV 2190, thus
"3" (notapplicable) is returned.
5.5.4.4.13 .surveillance.supportHardwareStatus
OID: .1.3.6.1.4.1.21035.41.3.13.0
Syntax: INTEGER {ok (1), notok (2), notapplicable (3)}
Access: read-only
Description: The status of supporting hardware, e.g. of a digital interface
module. In this application .supportHardwareStatus is mapped to
the surveillance of the fan & monitoring module, i.e.
"1" ok: no fan & monitoring module error is reported;
"2" not ok: a fan & monitoring module error was detected;
"3" not applicable: is not returned for this type of device.
5.5.4.4.14 .surveillance.errorDescription
OID: .1.3.6.1.4.1.21035.41.3.14.0
Syntax: OCTET STRING (SIZE(1..48))
Access: accessible-for-notify
Description: .errorDescription contains the latest error description string, which
is used for .trapAlarmText; please refer to chapter 5.5.4.1.1.