Digi Connect Series User Manual

Configureand managethedeviceusing theDigi Connect and ConnectPort
TSFamily command lineinterface
Management through the
command lineinterface
Digi Connect Family and ConnectPort TSFamily
136
set pmodem
Usethe set pmodem command to configure the modem emulation.
set pppoutbound
Usethe set pppoutbound command to configure the PPPoutbound connections.
set ppp
Usethe set ppp command to configure PPPconnections.
set profiles
Usethe set profilescommand to configure the port profile for a serial port.
set radius
Usethe set radiuscommand to start, stop, and set RADIUS authentication.
set realport
Usethe set realport command to configure RealPort.
set rtstoggle
Usethe set rtstoggle command to configure the RTStoggle.
set serial
Usethe set serial command to configure the serial port options.
set service
Usethe set service command to configure the network services.
set snmp
Usethe set snmp command to configure SNMP, including SNMPtraps, such as:
n
Authentication failure
n
Cold start
n
Link up
n
Login traps
Theset snmp command also displayscurrent SNMPsettings.
set system
Usethe set system command to configure the system identifying information.

Digi Connect Series Specifications

General

Brand	Digi
Model	Connect Series
Category	Network Router
Language	English