Digi Connect Series User Manual

SNMPdevice monitoring capabilities SNMPconfiguration
Digi Connect Family and ConnectPort TSFamily
141
n
DIGI enterprise MIBs
l
DIGI CONNECT DEVICEINFOMIB—ADigi enterprise MIBfor handling and displaying basic
device information, such asfirmware revisionsin use, device name, IPnetwork
information, memory use, and CPUstatistics.
l
Digi Connect Mobile Information MIB—ADigi enterprise MIBfor handling and displaying
device information for mobile devices.
l
Digi Connect Wireless LANMIB—ADigi enterprise MIBfor handling and displaying basic
device information for wirelessdevices.
l
DIGI SERIAL ALARMTRAPSMIB—ADigi enterprise MIBfor sending alarmsasSNMPtraps.
l
Digi Login Traps MIB—ADigi enterprise MIBthat indicates when users attempt to sign into
the device, and whether the attempt was successful.
l
Digi Structures of Management MIB—ADigi enterprise MIB that provides data structuresfor
managing hosts and gateways on a network.
l
Digi Connect MobileTraps MIB—ADigi enterprise MIBfor sending alarmsasSNMPtrapsfor
mobile devices.
l
Digi Connectware NotificationsMIB—ThisDigi enterprise MIB may be required by some
SNMPimport facilities, as other MIBs may refer to it.
See Download a Digi MIB for instructions on downloading a Digi MIB from theDigi website.
SNMP configuration
You can configure basic network and serial configurationsfor Digi Connect and ConnectPort TSFamily
devices through SNMP:
n
Usea subset of standard MIBs for network and serial configuration. See Supported RFCsand
MIBsfor more information on supported MIBS.
n
UseDigi enterprise MIBsfor device identification, alarm handling, and Digi Connect and
ConnectPort TSFamily-specific configurations.
To use the MIBS, you must load MIBs into a network management station (NMS).
Note that some SNMPconfiguration settingscan be configured only from theweb or command line
interfaces. For example, to send alarmsasSNMPtraps:
n
In the web interface, use the Configuration > Alarms> alarm > Alarm Destinations> Send
SNMP trap to following destination when alarm occursoption. See AlarmsConfiguration.
n
In the command-lineinterface, use the set alarm option typescript. See the set alarm
command description in the Digi Connect®Family Command Reference on www.digi.com.
Note You cannot configure all network and serial configurations using SNMP. For more advanced
configuration settings, use the web or command-line interfaces.

Digi Connect Series Specifications

General

Brand	Digi
Model	Connect Series
Category	Network Router
Language	English