Get started with Digi Connect and ConnectPort TSFamily
products
Connect SP: Verifythe componentsand connect the
hardware
Digi Connect Family and ConnectPort TSFamily
28
Item Description
Null modem for serial configuration
Personal computer
Note Aloose label sticker that includesthe unique device password isincluded in
the box. Retain this label sticker with your hardware records. Thisdefault password
will be needed if thedevice isfactory reset and you want to access the web UI on the
device or to register the device with Digi Remote Manager®. If the device was already
registered with Remote Manager at the timeof the factory reset, you do not need the
unique password to access the device in Remote Manager.
Connect the hardware
1. Connect thepower supply to the power connector.
2. Connect theEthernet cable to the Ethernet port.
To Next Page
Loading...
