Digi Connect Series User Manual

Using the Digi Connect and ConnectPort TSFamily web interface Administration
Digi Connect Family and ConnectPort TSFamily
61
To reboot a Digi Connect and ConnectPort TSFamily from the web interface.
Note The user must have permission to execute a reboot. See User Configuration.
1. Select Administration > Reboot.
2. Click theReboot button. Wait approximately one minute for the reboot to complete.
Enable/disable access to network services
You can enable and disable access to various network services, such as ADDP, RealPort, SNMP, and
telnet. For example, you can disable accessto all network services that arenot required for running or
interfacing with the Digi Connect and ConnectPort TSFamily product for performance and security
reasons. From theweb interface, you can enable and disable network services on theNetwork
Services Settingspage for a Digi Connect and ConnectPort TSFamily product. See Network Services
Settings.

Digi Connect Series Specifications

General

Brand	Digi
Model	Connect Series
Category	Network Router
Language	English