Digi Connect Series

Hardware System statusLEDs
Digi Connect Family and ConnectPort TSFamily
152
LED Behaviors
LED
Pin
Header
EM
Integration Kit
Digi
Connect EM
Integration Kit
Digi Connect Wi-EM Development Kit
Top left
(green)
1 (+)
3(-)
Serial port activity:
Off: The serial channel isidle.
Blinking: Serial data istransmitted or received.
This LEDis
software
programmable
Top right
(green)
5 (+)
7 (-)
Network link status:
Off: No link has been
detected.
On: Alink hasbeen
detected.
Network link status:
On: Unit isassociated
with an accesspoint.
Blinking slowly: Unit
isin ad hoc mode.
Blinking quickly:
Unit isscanning for a
network.
Same as
Integration Kit
(Network link status)
Bottom
left (red)
2 (+)
4 (-)
Diagnostics:
Blinking 1-1-1: Starting the operating system.
Blinking 1-5-1: Configuration has been returned to
factory defaults.
Note If other blinking patterns occur, contact Digi
Technical Support.
This LEDissoftware
programmable
Bottom
right
(yellow)
6 (+)
8 (-)
Blinking: Network data istransmitted or received This LEDis
software
programmable