Digi Connect Series

Digi Connect and ConnectPort TSFamily features Network connectionsand data paths
Digi Connect Family and ConnectPort TSFamily
20
n
Raw TCP connection: The Digi Connect and ConnectPort TSFamily initiatesa raw TCPsocket
connection to a remote entity.
n
Telnet connection: The Digi Connect and ConnectPort TSFamily initiates a TCPconnection
using the telnet protocol to a remote entity.
n
Raw TLSencrypted connection: The Digi Connect and ConnectPort TSFamily initiates an
encrypted raw TCPsocket connection to a remote entity.
n
Rlogin connection: The Digi Connect and ConnectPort TSFamily initiates a TCPconnection
using the rlogin protocol to a remote entity.
Command-line interface (CLI)-based client connections
CLI-based client connections areavailable for use when you establish a session with the Digi Connect
and ConnectPort TSFamily product’sCLI. CLI-based client connectionsinclude:
n
ssh: Allows you to connect to a remote entity using thessh protocol.
n
telnet: Allowsyou to connect to a remote entity using thetelnet protocol.
n
rlogin: Allowsyou to connect to remote entity using the rlogin protocol (bash only).
n
scp: Allows you to transfer files(bash only).
n
connect: Begin communicating with a local serial port.
Note Additional communication methods include using a bash shell such as scp, tftp, nc, or using
Python.
Modem emulation (pseudo-modem) client connections
When a port isin the modem-emulation or pseudo-modem mode, it can initiate network connections
based on ATcommand strings received on the serial port. See the Digi Connect®Family Command
Reference on www.digi.com for modem emulation AT commands.