Using the Digi Connect and ConnectPort TSFamily web interface Administration
Digi Connect Family and ConnectPort TSFamily
59
IP statistics
n
DatagramsReceived/DatagramsForwarded: Number of received or forwarded datagrams.
n
Forwarding: Displayswhether forwarding isenabled or disabled.
n
No Routes: Number of outgoing datagrams for which no route to the destination IPcan be
found.
n
Routing Discards: Number of discarded outgoing datagrams.
n
Default Time-To-Live: Number of routersan IPpacket can passthrough before it isdiscarded.
TCP Statistics
n
SegmentsReceived/SegmentsSent: Number of received or sent segments.
n
Active Opens: Number of active opens. In an active open, the Digi Connect and ConnectPort
TSFamily product initiates a connection request with a server.
n
Passive Opens: Number of passive opens. In a passive open, the Digi Connect and
ConnectPort TSFamily listensfor a connection request from a client.
n
Bad SegmentsReceived: Number of segmentsreceived with errors.
n
Attempt Fails: Number of failed connection attempts.
n
SegmentsRetransmitted: Number of retransmitted segments. Segments are retransmitted
when the server doesnot respond to a packet sent by the client. Aretransmit limits the
number of lost and discarded packets.
n
Established Resets: Number of established connections that have been reset.
UDP Statistics
n
DatagramsReceived/DatagramsSent: Number of datagramsreceived or sent.
n
Bad Datagrams Received: Number of bad datagramsreceived. Thisnumber does not include
the value contained by No Ports.
n
No Ports: Number of received datagramsthat were discarded because the specified port was
invalid.
ICMP Statistics
n
Messages Received: Number of messages received.
n
Bad Messages Received: Number of received messages with errors.
n
Destination Unreachable Messages Received: Number of destination unreachable messages
received. Adestination unreachable message issent to theoriginator when a datagram fails to
reach itsintended destination.
To Next Page
Loading...
Need help?
General
