Digilite Pulse MX - Playback Key Operations; Controller Modes; Master Controls

PULSE MX
10
Load
Used to load a cue or a palette into the editor for any amendments. The Load key loads the last cue or
palette selected into the editor or, if pressed simultaneously with the ash key of a controller, it loads
the controller cue into the editor (only if the controller is congured in ‘manual cue’).
Store
Activates the Store menu. When the store menu is active, it is possible to save a palette (yellow but-
tons), a cue (brown buttons) or save the currently selected xtures as a new group.
If a controller is congured in manual cue, by simultaneously pressing the Store key and its ash key,
the contents in the editor are saved in the cue associated with the controller itself.
Pressing the Store key twice in quick succession saves the contents of the editor as a new cue in the
current playback.
Update
Updates and saves the last cue or palettes loaded into the editor. During loading, the console keeps
track of the amount loaded into the editor; the Update key overwrites the original cue or palette with
the current contents of the editor.
Edit/Qlist
Key that alternately recalls the windows of the editor and cue lists.
Menu
Activates a pop-up menu that allows access to auxiliary functions of a particular window. In each
window, for reasons of space or opportunity, less frequently used functions are placed in the context
specic menu.
1.3 PLAYBACK KEYS
When you press a playback key, it activates the rst cue on the cue-list contained in the playback, or
activates the next cue, if the cue list was already active (“Go” function); this last playback also becomes
the current registry playback.
Can be used in conjunction with the Release Select, Page and Bank keys (see Edit Keys section).
1.4 CONTROLLERS
The controllers can be individually congured in three dierent ways: Playback master, manual cue or
group master. Conguration of the controllers is carried out by means of the Controller conguration
window retrievable from the Setup menu (see Chap. 4 — Controllers.); the default value (after a Clear
show) is Playback master.
1.5 GRAND MASTER AND DBO
The grand master slider only regulates the level of the console HTP channels (usually the channels that
regulate the brightness of the xtures);
Pressing the DBO key (Dead Blackout) will immediately force all HTP channel levels to zero and these will
remain at zero as long as the key is pressed.