PULSE MX
4
WARNING! Before carrying out any operations with the unit, carefully read this instruction
manual and keep it with cure for future reference. It contains important information about
the installation, usage and maintenance of the unit.
NOTE
This manual is divided into two parts: the Quick-Start Guide, which gives a general overview of the con-
sole and enables the operator to be immediately operational using the basic functions. The second part
is the actual user manual where many of the concepts seen in the rst part are examined in greater detail.
It is recommended that you rst read the Quick-Start Guide in order to have a global overview of the
console's features and settings and to be able to contextualize the information in the second part more
accurately.
SAFETY
General instruction
• The products referred to in this manual conform to the European Community Directives and are
therefore marked with .
• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel
only. Never make any modications on the unit not described in this instruction manual, otherwise
you will risk an electric shock.
• Connection must be made to a power supply system tted with ecient earthing (Class I appliance
according to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the
units from indirect contact and/or shorting to earth by using appropriately sized residual current
devices.
• The connection to the main network of electric distribution must be carried out by a qualied elec-
trical installer. Check that the main frequency and voltage correspond to those for which the unit is
designed as given on the electrical data label.
• This unit is not for home use, only professional applications.
• Never use the xture under the following conditions:
- in places subject to vibrations or bumps;
- in places with a temperature of over 45 °C or lower than 2°C.
• Make certain that no inammable liquids, water or metal objects enter the xture.
• Do not dismantle or modify the xture.
• All work must always be carried out by qualied technical personnel. Contact the nearest sales point
for an inspection or contact the manufacturer directly.
• If the unit is to be put out of operation denitively, take it to a local recycling
plant for a disposal which is not harmful to the environment.
To Next Page
Loading...