DG-GS1528HP User Manual
Select the ACL name to which an ACE is being added.
Display the sequence of ACE.
Display the action of ACE.
Display the protocol value of ACE.
Display the source IP address and mask of ACE.
Display the destination IP address and mask of ACE.
Display single source port or a range of source ports of
ACE. Only available when protocol is TCP or UDP.
Display single destination port or a range of destination
ports of ACE. Only available when protocol is TCP or UDP.
Display the TCP flag value if ACE. Only available when
protocol is TCP.
Display the ToS value of ACE which could be DSCP or IP
Precedence.
Display the ICMP type and code of ACE. Only available
when protocol is ICMP.
Click "Add" button to Add ACE menu.
To Next Page
Loading...
Need help?
General
