29 EVOLUTION 1 SYSTEM MANUAL Issue 1.1 20 Dec 2006
Sequence number format is programmable in the
STOPPED mode. The counter may be set to
count either up or down by selecting number 1 or
2. Pressing enter advances the user to the next
menu prompt.
Clearing the sequence field resets the counter to
their initial settings.
The next prompt allows for changes in the
sequence limit field. Selecting Y allows the user to
enter the desired maximum (minimum for down
count) count. Digits are enter via the keyboard
right justified. As an example to set a maximum
count of 5000 enter 5000. Pressing the DEL key
allows for re-entry while pressing the ENTER key
returns the user to the STOPPED mode.
SEQ. NUMBER
1= COUNT UP
2= COUNT DOWN
CLEAR SEQ# FIELD
ES OR NO Y/N
COUNTER LIMIT
ANY CHANGES Y/N
ENTER #000000000
COUNTER LIMIT
ANY CHANGES Y/N
ENTER #000005000
To Next Page
Loading...