28 EVOLUTION 1 SYSTEM MANUAL Issue 1.1 20 Dec 2006
Enabling variable field programming requires the
use of the special function keys.
To enter a date that automatically changes use
the key. The current date format as set in the
F3 menu is entered into the message.
To enter a time that automatically changes use the
key. The current date format as set in the F3
menu is entered into the message.
Sequence numbers may be added to a message
with the key. Note when the key is
depressed the four ---- are changed to ####
indicating a sequence number field. After entering
the correct sequence number press the key
to terminate the sequence field. The maximum
number of digits allowable is 9 numeric
characters.
Date offset codes are entered by using the
key.
The correct date offset format as defined in the F3
menu is entered into the message with the
key to enter a shift code.
Shift codes are defined in the F3 menu and will
automatically change at the appropriate shift
times. The shift designator S is displayed to
indicate the data entry.
MESSAGE ENTRY
- - - - FONT- 1 LINE
DM/DD/DY
MESSAGE ENTRY
- - - - FONT- 1 LINE
HH:MM
MESSAGE ENTRY
#### FONT- 1 LINE
0000
MESSAGE ENTRY
- - - - FONT- 1 LINE
0000
MESSAGE ENTRY
< < < < FONT- 1 LINE
DM.DD.
MESSAGE ENTRY
- - - - FONT- 1 LINE
S
MESSAGE ENTRY
- - - - FONT- 1 LINE
To Next Page
Loading...