35 EVOLUTION 1 SYSTEM MANUAL Issue 1.1 20 Dec 2006
PASSWORD PROTECTION
The printer contains a password function
designed to limit access to the edit menu and
prevent unauthorized changing of message
lines. To activate this function, switch the unit
off, then press and hold while switching the
unit on. The display changes and requests the
default password (which is 12345). Enter the
12345.
The screen to the left appears and prompts the
operator or ENABLE PASSWORD
A response of N maintains the current password
and disables password protection.
If the response Y is selected the screen at the
left appears to prompt the user to enter a new
password. Enter the new 5 character password
any combination of letters and numbers may be
used. Once this has been completed, the unit
will not allow message editing without the entry of the password.
NOTE: If the new password is misplaced or forgotten, reset the
unit.
PASSWORD XXXXX
ENABLE PASSWORD
ES OR NO Y/N
PASSWORD XXXXX
To Next Page
Loading...