Click “Start’ to enable PCM capture
Dialing out through gateway, start talking a short while then hangup the call.
Click ‘Stop’ to disable network capture
Save the capture file to local computer
The capture is named to ‘capture(x).pcap’, x is serial number of capture and will be
added 1 in next time. The sample of PCM capture as below:
Getting start to Syslog capture
Syslog capture is another way to obtain syslog which the same as remote syslog server
and filelog. The capture file is save as pcap format so that it can be opened in some of
capture software like Wireshark, Ethereal software etc.
To enable syslog capture
Select Syslog special only on Network Capture page
Click “Start’ to enable syslog capture
Dialing out through gateway, start talking a short while then hangup the call.
Click ‘Stop’ to disable syslog capture
Save the capture to local computer
The capture is named to ‘capture(x).pcap’, x is serial number of capture and will be
added 1 in next time. The sample of syslog capture as below:
To Next Page
Loading...
