2.Function
Communicate with PC through serial port to transmit data, command and alarm information.
Transmit data and command with reaction disk board, sample&reagent disk board, ISE board,
refrigeration board and AD board communication through mother board.
As shown in figure:
Solenoid Valve:
Refer to 5.2.1
SV6 －water inlet valve of incubation bath
SV10－ water outlet valve of incubation bath
SV13－water inlet valve of water tank
J01：control port of vacuum pump, valve.
J02：communication port with computer（COM port）
J03：AD board data collection port
J04：pressure sensor of water tank, incubation bath.
J05：temperature sensor of water tank, incubation bath.
J06：solid state relay board port .
J07：float and liquid level signal interface.
J10：serial port monitor communication port.
J705：optocoupler signal interface of reaction disk.
To Next Page