Dish Network 500 - Page 107

lPage 103
Page 103
Connecting Each Receiver to a Phone
5. Select one of the following:
• If you do not need to dial a prefix, select the
No Prefix option.
• If you need to dial a prefix (for example, dial 9 to get an outside line),
select the
Prefix Code option. The receiver displays the same number
of boxes (highlighting the first box) where you must enter the digits.
Use the NUMBER PAD to enter the prefix code. As you enter each
number, the highlight moves to the next box.
6. Move the highlight to the
Save option. Press the SELECT button to save
the settings.