Dish Network 500 - Check the Device Codes

Page 71
Control Other Devices with the Remote
Check the Device Codes
You can find out what device code you’ve set for each remote mode.
1. Press and hold the mode
button until all the other
mode buttons light up, let go
of the mode button.
The mode button flashes.
For example, hold the TV mode
button for a TV until all of the other
mode buttons light. When you let
go, the TV mode light will flash.
2. Press the POUND (#)
button twice.
The mode button flashes the
number for each digit of the
device code, with a pause
between the groups of
flashes. A quick flash is for
zero.
For example, if the code is 570, the
mode button flashes five times,
pauses, flashes seven times, pauses,
and flashes once quickly.
3. For AUX mode only. The
first group of flashes tells
you what the AUX mode
controls. A quick flash
(zero) before the three-digit
code is for a TV; one regular
flash is for a VCR; and two
flashes is for a tuner,
amplifier, or cable box.
For example, if the TV code is 570,
the AUX mode button flashes once
quickly (indicating 0 for TV),
pauses, flashes five times, pauses,
flashes seven times, pauses, and
flashes once quickly.