Page 21
Remote Control
Remote Control Batteries
The remote control comes with AAA batteries. When you replace old batteries,
you should replace all of the batteries. Use batteries of the same kind, for
example alkaline or carbon zinc, and don’t mix batteries of different kinds.
Alkaline batteries last longer.
Changing the Batteries
1. Press down on the battery cover’s top latch and lift
the cover off.
2. Take out all of the old batteries.
3. Put the new batteries in. Make sure you match the
plus (“+”) ends with the plus markings on the
battery case.
4. Fit the battery cover’s bottom tab back into the slot
at the bottom of the battery case, and snap the cover
back into place.
Low Battery Warning
When you see a low battery warning message on the bottom line of the Program
Banner, the batteries in the remote control are weak and need to be replaced.
To Next Page
Loading...
