Page 67
Use the DishDVR Features
Copy Recordings to Videotape
You may want to keep a videotape copy of a recording you made
on the DishDVR features. Or, if the receiver is out of room,
maybe you’ll want to move recordings to a videotape to store them.
Many satellite TV programs and films are copyrighted. In some cases,
copyright law may apply to private, in-home recording.
You may not be able to play back events with full digital audio and
video quality from a videotape.
Here’s what to do:
1. Connect the receiver’s back panel audio/video outputs to the VCR’s audio/
video inputs.
2. Put a rewound tape into the VCR.
3. Turn the VCR on.
4. Press the remote control PVR button. This opens the
My
Recordings
menu.
5. Select an event on the
My Recordings menu. This opens an information
menu for that event.
6. Start the VCR to record onto the tape.
7. On the event’s info menu, select the
Start option. The receiver
begins to play back the event.
8. When the play back is done,
either: Select another event to copy, or: If you
don’t have another copy to make, stop the VCR.
Tip: If you
want to
“archive” an
event to save
it for a long
time, you can
move it from
the receiver to
a VCR.
To Next Page
Loading...
