Dish Network 500 - Delete an Event Timer

Page 55
Use Event Timers
7. If you want to change the Start Time, the End
Time
, or the Date, select the Set Date/Time option.
This opens the Set Date/Time for Manual Timer
menu.
Note: If you don’t want to change the date or time, skip to step 10.
8. Use the number buttons to enter the
Start Time (make sure you select AM
or
PM) and the End Time, (make sure you select AM or PM).
Note: The menu displays zeroes for you in
numbers like “0925”.
9. Use the number buttons to enter the Date.
10. Select the
Create Timer option.
11.
Either: To edit another event timer, highlight the timer and select the Edit
option again.
or: If you don’t want to edit another event timer, press the CANCEL
button.
Delete an Event Timer
1. Press the MENU button.
2. Select the
Timers option to open the Event Timer Management menu.