28 ECLYPSE Connected Thermostat (ECY-STAT)
CHAPTER 5
Preparing for a Wired Initial Connection
General Information
Default User Credentials
Use the following credentials to access the ECLYPSE Web Interface:
Username: admin Password: admin
This password is only valid for a first-time connection and you will be prompted to change it after your
first
login. Please ensure note down the changed password.
Locating the Default Network Configurations on the ECY-STAT (
Home > About
)
Default IP Configurations
The default Wi-Fi IP address for the ECY-STAT Hotspot is 192.168.0.1.
The ECY-STAT is also automatically set in DHCP mode and requires a connection to a router acting
as DHCP
server to communicate to a network. This setting may be changed through the ECLYPSE Web Inter-
face.
Resetting Wi-Fi Configurations
The Reset Wi-Fi Configuration option will re-activate the Hotspot on the ECY-STAT. It is used when an
ECY-STAT in Wi-Fi client mode is unable to connect to its Wi-Fi network, because of a wrong pass-
word, for instance. To perform this, select Main Menu > Settings > Advanced Settings (you may have
to enter your login credentials again) > Reset Wi-Fi Configuration.
Preparing for a Wired Initial Connection
To Next Page
Loading...
Need help?
General
