Distech Controls ECLYPSE ECY-STAT - Configuring the EC-Net Stations Restservice; Configuring the EC-Net Stations Radiusservice

40 ECLYPSE Connected Thermostat (ECY-STAT)
Configuring the EC-Net Station's RestService
To configure the REST service in EC-Net, refer to the EC- gfx Program Getting Started User Guide:
Getting Started on EC-Net for ECB & ECY Series Controllers. Any ECLYPSE controller being con-
nected to by the RestService must be able to authenticate the User name and password configured in
the RestService configuration.
Figure24: Typical RestService Configuration
Configuring the EC-Net Station's RadiusService
To configure the Radius Service in EC-Net, refer to the EC- gfx Program Getting Started User Guide:
Getting Started on EC-Net for ECB & ECY Series Controllers.
A RADIUS server uses a challenge/response mechanism to authenticate a user’s logon credentials
(username and password). When one or more ECY Series controllers subscribe to a RADIUS server,
this RADIUS server provides centralized user management to control which users have access to any
of these ECY Series controllers.
Figure25: Typical Radius Service Configuration
See also Setting Up the SSO Functionality through a Radius Server.
Supported RADIUS Server Architectures