120 ECLYPSE Connected Thermostat (ECY-STAT)
Custom Actions
Custom actions must first be programmed using EC-
gfx
Program and enabled or disabled using the
ECLYPSE Web Interface. See the ECLYPSE User Guide and the EC-
gfx
Program User Guide for
more information.
Depending on the programmed configuration of the custom actions, different options will be available
for each action. To enable a custom action, simply tap the desired action. Depending on the type of
custom action and its configuration in EC-
gfx
Program, a green checkmark may appear and indi-
cate whether a custom action is currently enabled or not.
Navigating the User Interface
To Next Page
Loading...
