9ECLYPSE Connected Thermostat (ECY-STAT)
£ Xpress
Network
Utility User Guide: This document is available on Distech Controls Documentation
Portal
£ EC-
gfx
Program User Guide: This document is available on Distech Controls Documentation Portal
ECLYPSE Introduction
The ECLYPSE series is a modular and scalable platform that is used to control a wide range of HVAC
applications. It supports BACnet/IP communication and is a listed BACnet Building Controller (B-BC).
TheECY-STAT is geared towards new or existing rooftop unit, heatpump unit, fancoil unit and other
zone control applications. It features a touchscreen interface, multiple connectivity options (both wired
IP and Wi-Fi) for system communication, and Bluetooth® low energy (BLE) for mobile connectivity.
This user guide also explains how to configure the ECY-STAT’s configuration interfaces.
Network Security
Maintaining the highest level of network security, especially when IP devices are connected to the In-
ternet requires specially trained personnel who are aware of the necessary techniques to ensure con-
tinued protection. This must include the implementation of a Virtual Private Network (VPN) to connect
with IP controllers over the Internet. It is also important to coordinate with Information Technology (IT)
department personnel the use of shared network resources.
At the first connection to an ECY-STAT you will be forced to change the password to a strong pass-
word for the admin account to protect access to the controller.
Intended Audience
This user guide is intended for system designers, integrators, electricians, and field technicians who
have experience with control systems, and who want to learn about how to make a successful IP net-
work installation. It is recommended that anyone installing and configuring the devices specified in this
user guide have prior training in the usage of these devices.
Related Documentation
The follow documentation is referenced in this document. These documents are available on Distech
Controls SmartSource website.
£ Always refer to the Hardware Installation Guide for the devices you are installing.
£ EC-
gfx
Program User Guide
£ Open-to-Wireless™ Application Guide
£ Network Guide
Introduction
To Next Page
Loading...
Need help?
General
