35ECLYPSE Connected Thermostat (ECY-STAT)
Connecting to the ECY-STAT's Configuration Web
Interface
The ECY-STAT configuration can be made through the configuration Web interface to set all the ECY-
STAT’s configuration parameters including the ECY-STAT’s IP address according to your network
planning.
At the first connection to an ECY-STAT you will be forced to change the password to a strong pass-
word for the admin account to protect access to the controller.
It is important to create new user accounts with strong passwords to protect the controller from unau-
thorized access. See User Management, Securing an ECY-STAT, Supported RADIUS Server Architectures.
Next Steps
In Network Settings, configure the ECY-STAT’s network parameters so that they are compatible with
your network. See ECLYPSE Web Interface.
First Time Connection to an ECY-STAT
To Next Page
Loading...