87ECLYPSE Connected Thermostat (ECY-STAT)
4. In the Confirmation section, review the selected features you selected and select Remove backup
file after restore to remove the backup file from the device after reboot if you wish. Click Finish.
The restore process may take a few minutes.
You cannot restore a backup which was created in a more recent firmware version than the one you are restoring to.
IoT
IoT Configuration
The IoT tab is used to connect to the cloud.
1. Select the IoT tab.
2. Click Create New Configuration. The IoT Hub Configuration dialog box is displayed.
3. Enter the IoT Hub and/or Edge connection string and click Connect. A connection string contains
the following information:
ECLYPSE Web Interface
To Next Page
Loading...
Need help?
General
