Distech Controls ECLYPSE ECY-STAT User Manual

92 ECLYPSE Connected Thermostat (ECY-STAT)
Groups and Actions
Sunblind Groups, Lighting Groups, and Custom Actions must first be added and configured with EC-
gfx Program. See the EC- gfx Program User Guide for more information. Once they have been added,
configured, and synchronized with the controller, they will now be visible in the Web Configuration
page.
After clicking the Sunblind Groups, Light Groups, or Custom Actions buttons, a dialogue window
shows the options available.
Figure69: Sunblind Groups Dialogue Box
Item Description
Programming Name
This displays the name given in the EC- gfx Program programming sheet. This name can only be
edited in EC- gfx Program.
Enabled
Enable or disable the group from being visible on the ECY-STAT and the my PERSONIFY mobile
application.
Display Name
The Display Name will be displayed on the ECY-STAT screen, the my PERSONIFY mobile
application, or on a UNIWAVE device. By default, the Display Name is the same as the
Programming Name. The Display Name can be edited using the icon, however there is a 14
character limit.
When creating custom actions, it is recommended that you assign descriptive names with a
maximum of 13 characters for the UNIWAVE and 15 characters for the ECY-STAT, to ensure that
the name is fully visible on the display.
Cancel Click
Cancel
to abort all changes and close the dialogue box.
Apply Click
Apply
to apply and save the changes.
ECLYPSE Web Interface

Distech Controls ECLYPSE ECY-STAT Specifications

General

Brand	Distech Controls
Model	ECLYPSE ECY-STAT
Category	Thermostat
Language	English