97ECLYPSE Connected Thermostat (ECY-STAT)
5. Set the encryption mode to be used by this access point in Encryption:
– OPEN: this option should be avoided as it does not provide any wireless security which al-
lows any wireless client to access the LAN.
– WPA2: select the Wi-Fi Protected Access II option to secure the Wi-Fi network with a pass-
word.
– WPA2 Enterprise: Use this option if you are connecting to an enterprise network that has a
working RADIUS authentication server. This RADIUS server provides user authentication.
6. Enter the required Username and Password.
7. Choose the access point’s Extensible Authentication Protocol (EAP) and Phase2 type.
8. Click Apply.
Configuring the ECLYPSE Wi-Fi Wireless Networks
To Next Page
Loading...
Need help?
General
