DMP XF6 - Bell Options

Digital Monitoring Products XF6 Series Installation and Programming Guide
30
Select NONE to don’t allow encryption for wireless devices programmed into the panel.
The default is NONE.
Enter Passphrase
ENTER PASSPHRASE displays if you select ALL or BOTH for wireless encryption. In order
for the panel to support encrypted 1100 Series wireless devices, a passphrase must be
entered. The passphrase must be an 8-digit hexadecimal number which determines the
system’s encryption key.
Trouble Audible Annunciation
This option allows you to choose when trouble audibles will annunciate from the keypad.
This also includes AC Trouble for Fire Keypads, Battery Trouble, Panel Tamper, and other
System Troubles.
Press any top row key to select the keypad buzzer annunciation method for wireless low
battery and missing messages. Select ANY to enable annunciation anytime. Select DAY to
enable annunciation except during sleeping hours (9 PM to 9 AM). Select MIN (minimum)
to annunciate only Fire and Fire Verify zones during daytime hours (9 AM to 9 PM). Default
is ANY.
BELL OPTIONS
Bell Options
This section allows you to program the panel bell output functions.
1100 PASSPHRASE
********
TRBL AUDIBLE: ANY
BELL OPTIONS