Digital Monitoring Products XF6 Series Installation and Programming Guide
34
Output Name
This section allows you to define a 32 character alphanumeric name for any output
numbers. See the XF6 Users Guide (LT-2792) Appendix for browser operation.
Output Real-Time Status
Selecting YES allows Real-Time Status reports of a hardwire device, such as Output ON,
OFF, PULSE, or TEMPORAL to be sent using PC Log reports. Selecting NO disables Real-
Time Status for this output device. Default is NO.
OUTPUT GROUPS
Output Groups
This function allows you to assign outputs to groups. Output groups can be assigned to
other areas of programming such as Output Options or Alarm Action of Zone Information,
just like single outputs are assigned. This allows the entire group of outputs to turn on and
o as required by the programming option.
OUTPUT NAME
OUTPUT REAL-TIME
STATUS NO YES
OUTPUT GROUPS
To Next Page
Loading...