XF6 Series Installation and Programming Guide Digital Monitoring Products
33
Supervisory Alarm Output
Enter the output/Favorite number to turn on when a supervisory zone type is placed into
an alarm. The output turns o when all supervisory type zones are restored to normal.
Enter 0 (zero) to disable. Default is 0.
AC Fail Output
This output turns on when the panel detects no AC. The output turns o when AC power is
detected. Default is 0.
Carbon Monoxide Alarm Output
This output turns on any time a Carbon Monoxide Zone (CO) is placed in alarm. The output
is turned o using Sensor Reset option while no additional CO type zones are in alarm.
OUTPUT INFORMATION
Output Number
Enter an output number. Entry range is 1 to 6, 500-599, G01-G20.
In order for wireless output troubles to display at a keypad, the keypad address must be
specified at the Auxiliary 1 Zones option in the Status List programming.
SUPV ALM OUT: 0
AC FAIL OUT: 0
OUTPUT OPTIONS
CO ALRM OUT: XXX
OUTPUT NUMBER
To Next Page
Loading...